One of the major additions to the Z359.1 Standard is the new 3600 lb gates strength requirements. Under the new standard, snap hooks and carabiners must meet the following:

  • Gate Face must withstand a load of 3,600 lbs. (up from 220 lbs.)
  • Side of Gate must withstand a load of 3,600 lbs. (up from 350 lbs.)
  • Minor Axis of a snap hook or carabiner, except those with captive eyes, must withstand 3,600 lbs.
  • Tensile load for the snap hook or carabiner must withstand 5,000 lbs.

Below is our selection of 3600 lb gates that meet these new standards.

3600 Lb Gates
Cable lanyard. Galvanized cable with PVC coating. Double-locking snaps each end.
97424 1/4″ – 5/16″ x 4′
97426 1/4″ – 5/16″ x 6′		 Cable lanyard. Galvanized cable with PVC coating. Double-locking snaps and shock-absorbing pack one end.
97424S 1/4″ – 5/16″ x 4′
97426S 1/4″ – 5/16″ x 6′		 Cable lanyard, shock-absorbing Y-lanyard with large rebar hooks.
97426SYCT 1/4″ – 5/16″ x 6′
3600 Lb Gates
Nylon web lanyard with double locking snaps each end.
97502 1″ x 2′
97504 1″ x 4′
97506 1″ x 6′		 Nylon web lanyard with doublelocking snap each end and shock absorbing pack one end.
97516 1″ x 6′		 Shock-absorbing Y-lanyard with double-locking snaps. and large rebar hooks.
97516YCT 1″ x 6′
97516YCTADJ 1″ x 6′ – Adjustable
3600 Lb Gates
Ultra-Tube two shock-absorbing lanyard.
UT-97516 1 1/4″ x 6′		 Ultra-Tube two shock-absorbing Y-lanyard with large rebar hooks.
UT-97516Y 1 1/4″ x 6′		 Ultra-Tube two shock-absorbing Y-lanyard with large carabiners.
UT-97516YBC 1 1/4″ x 6′
Ultra-Tube two shock-absorbing lanyard.
UTT-97516 1 1/4″ x 6′		 Ultra-Tube two shock-absorbing Y-lanyard.
UTT-97516Y 1 1/4″ x 6′		 Ultra-Tube two shock-absorbing Y-lanyard with large rebar hooks.
UTT-97516YCT 1 1/4″ x 6′
Ultra-Tube two shock absorbing Y-Lanyard and D-Ring Extender.
UTT-97516YD 1 1/4″ x 6′		 Ultra-Tube two shock absorbing Y-Lanyard w/large Rebar hook and D-Ring Extender
UTT-97516YCTD 1 1/4″ x 6′		 Ultra-Tube shock absorbing Y-Lanyard w/large Rebar hook. Loop and D-Ring Extender Loop.
UTT-97516LYCTDE 1 1/4″ x 6′
Shock-absorbing lanyard with sliding D-ring and loop at shock pack.
97516LSD 1″ x 6′		 Shock-absorbing lanyard with sliding D-ring.
97516SD 1″ x 6′		 Shock-absorbing Y-lanyard with sliding D-rings.
97516YSD 1″ x 6′