Horizontal 100’ System 2 Person Rated – Synthetic

General Info

DESCRIPTION: The US-96960 Lifeline System is designed for use as an anchoring means for up to 2 persons, used where fall protection and horizontal mobility are required. Per OSHA regulations, horizontal lifelines shall be designed, installed, and used under the supervision of a qualified person as part of a complete personal fall arrest system with a minimum safety factor of 2. Qualified person is defined as follows:

“..one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project.”

Refer to applicable national standards, including ANSI Z359.1, local, state and federal (OSHA 1910.66 & 1626.502) requirements, for additional information on personal fall arrest systems.

SYSTEM REQUIREMENTS: When ready to use the horizontal system, one must consider the following:

• Personal Fall Protection: Use only OSHA /ANSI approved equipment.
• Anchorage Points: Must be rigid and allow for a 2:1 safety factor or 5000lbs MBL.
• Fall Distance: Measure the distance between working levels and lower levels, to allow adequate clearance for the system to function properly and not to come in contact with an obstruction and/or lower level. To avoid swinging or a pendulum effect, always work under your anchor point.

ALWAYS INSPECT ALL EQUIPMENT BEFORE EACH USE!!!!